top of page

The "No-Knead" Stretch and Fold Guide

Stretching and folding replaces traditional kneading by building gluten through time and gentle tension.

Step 1: The Mix & Initial Rest

  • Mix: Combine your ingredients until no dry flour remains.

  • Pro Tip: Use unbleached bread flour (12-14% protein) for a stronger rise and chewier texture.

  • Rest (Autolyse): Cover with a damp tea towel and let the dough rest for 20–30 minutes. This allows the flour to fully hydrate before you start working it.

Step 2: The Stretch & Fold Technique

To keep the dough from sticking, lightly wet your hands with water instead of adding more flour.

  1. Pull: Reach under one side of the dough. Gently pull it straight up as high as it will go without tearing.

  2. Fold: Fold the stretched dough over into the center of the bowl.

  3. Rotate: Turn the bowl a quarter turn (90°) and repeat.

  4. Complete a Set: Repeat until you have folded all four "corners." This is 1 set.

Step 3: The Interval Schedule

  • Frequency: Perform 4 to 6 sets of stretch and folds.

  • Rest Periods: Wait 30 minutes between each set. Keep the bowl covered during these rests.

  • Note: The dough will feel loose and lumpy at first but will become smooth and resistant as the gluten strengthens.

Step 4: Bulk Fermentation & Shaping

  • Final Rest: Leave the dough untouched for the last 2 hours (minimum) of its rise.

  • Check Readiness: Perform the Windowpane Test—stretch a small piece of dough; if it’s thin enough to see light through without tearing, it's ready.

  • Shape: Divide the dough and fold the edges into the center to create surface tension. Flip it over and roll it in a clockwise motion to create a smooth, tight skin.

Step 5: The "Cold Retard" (Flavor Boost)

  • Place your shaped dough in a floured basket or bowl, cover tightly, and refrigerate.

  • Timing: While you can bake after 5 hours, leaving it for 2 to 3 days develops the deep, classic sourdough tang.

To help you master your bake, here are two optimized schedules. One is for a Same-Day Prep (baking the next morning) and the other is a Slow-Ferment version for maximum flavor.

Option 1: The "Early Bird" Schedule

Best for getting the work done during the day so you can sleep while it rises.

  • 8:00 AM: Feed Starter. Keep it in a warm spot.

  • 1:00 PM: Mix Dough. Combine ingredients and let rest (Autolyse) for 30 mins.

  • 1:30 PM: Set 1. First round of stretch and folds.

  • 2:00 PM – 4:00 PM: Sets 2-6. Perform a set every 30 minutes.

  • 4:00 PM – 9:00 PM: Bulk Ferment. Leave the dough completely untouched to rise.

  • 9:00 PM: Shape & Fridge. Shape your loaves, place in baskets, and put them in the fridge overnight.

  • Next Morning: Bake. Score the cold dough and bake straight from the fridge.

Option 2: The "After Work" Schedule

Best for busy weekdays when you want to bake on the weekend.

  • 7:00 AM: Feed Starter before leaving for work.

  • 5:30 PM: Mix Dough. Let rest for 30 mins.

  • 6:00 PM – 8:30 PM: Sets 1-6. Perform a set every 30 minutes while making dinner.

  • 8:30 PM – 10:30 PM: Final Bulk Rest. Let the dough sit undisturbed.

  • 10:30 PM: Shape & Fridge. Tuck them into the fridge for a long, cold sleep.

  • 2–3 Days Later: Bake. The extra time in the fridge develops the "sour" flavor significantly.

Pro Timing Tips:

  • Temperature Matters: If your house is cold (below 68°F), your bulk ferment might need an extra 1–2 hours. If it's hot (above 75°F), it will go faster.

  • The Fridge is your "Pause" Button: If you get tired or busy after shaping, you can leave the dough in the refrigerator for up to 4 days before baking.

image_f2ea84b4.png

The Master Windowpane Guide

Step 1: Preparation & Pinch

  • The Pro Move: Dip your fingers in water (or a tiny bit of oil) before starting. This prevents the dough from sticking to you, which often causes it to tear prematurely and give a "false fail."

  • Pinch: Remove a small portion of dough about the size of a golf ball. 

Step 2: Flatten & Relax

  • Flatten: Press the dough into a compact, flat disc.

  • The Wait: Let the piece rest for 5 minutes after kneading or folding before testing. Tension from recent handling can cause dough to snap even if the gluten is strong. 

Step 3: The Gentle Stretch 

  • Action: Using your thumbs and forefingers, slowly pull the dough in opposite directions.

  • Technique: Apply gradual pressure. Think of it like stretching bubblegum; if you pull too fast, any dough will snap. 

Step 4: The Translucency Check

  • Result: Elevate the dough toward a light source.

  • Pass: You should see a paper-thin, uniform membrane where light or the outline of your fingers is visible through the dough without it rupturing. 

Troubleshooting: Why the Test Might "Lie"
  • Temperature Matters: Cold dough is less extensible. If your dough is straight from the fridge, it will likely fail the test even if the gluten is fully developed.

  • The Inclusion Rule: Whole wheat, rye, or seeded doughs contain bran or sharp edges that naturally pierce the membrane. For these, look for a "strong web" rather than perfect translucency.

  • Hydration: Very dry dough (low hydration) will be stiff and resist stretching, while very wet dough (high hydration) may require wetter hands to avoid sticking. 

Location

Des Moines, Iowa

A lusta antilop

For Help Email Us Here

  • alt.text.label.Facebook

©2023 – A lusta antilop. Büszkén készült a Wix.com segítségével

bottom of page